How to Fix KERNEL STACK INPAGE ERROR (0X00000017) BSOD on Windows 10 & 11

by

How to Fix KERNEL STACK INPAGE ERROR (0x00000017) BSOD on Windows 10 & 11

The KERNEL STACK INPAGE ERROR (0x00000017) is a critical system error that causes your Windows PC to crash with a Blue Screen of Death (BSOD). This error typically occurs when the operating system fails to read data from disk storage, often due to hardware issues, corrupted files, or driver conflicts. If you encounter this error, your screen will display a blue screen with the error message and restart your computer automatically. Below, well explain what causes this issue and provide step-by-step solutions to resolve it.

What Causes the KERNEL STACK INPAGE ERROR?

The 0x00000017 BSOD can be triggered by several factors, including:

  • Faulty or incompatible hardware, such as a failing hard drive, RAM issues, or problems with your motherboard.
  • Corrupted system files due to incomplete updates, improper shutdowns, or malware infections.
  • Outdated or conflicting drivers, especially those related to storage controllers, chipset, or network adapters.
  • Damaged or failing storage drive (HDD/SSD) with bad sectors or file system errors.
  • Overheating or power supply issues, which can cause instability in hardware components.
  • Corrupted Windows installation due to software conflicts or registry errors.

How to Fix KERNEL STACK INPAGE ERROR (0x00000017)

Follow these troubleshooting steps in order, starting with the simplest and moving to more advanced solutions.

### Method 1: Check for Hardware Issues

A failing hard drive or RAM is a common cause of this error. Run the following tests to diagnose hardware problems:

####

Run Hardware Diagnostics

  • Test your RAM: Use Windows Memory Diagnostic to check for errors.
    • Press Win + R, type mdsched.exe, and press Enter.
    • Select “Restart now and check for problems.”
    • Follow the on-screen instructions to complete the test. If errors are found, replace your RAM.
  • Check your hard drive health: Use CrystalDiskInfo or manufacturer tools (e.g., SSD manufacturers’ diagnostic software) to verify disk status.
  • Inspect cables and connections: Ensure all hardware components (RAM, storage drives) are properly seated.

####

Replace Faulty Hardware (if necessary)

If tests confirm a failing component (e.g., RAM or SSD/HDD), replace it. If the issue persists after replacement, proceed to the next steps.

—

### Method 2: Run System File Checker and DISM

Corrupted system files can trigger this error. Use built-in tools to repair them:

####

Run SFC (System File Checker)

  • Open Command Prompt as Administrator:
    • Press Win + X, then select “Terminal (Admin)” or “Command Prompt (Admin).”
  • Run the following command and wait for the process to complete: 
    sfc /scannow
  • Restart your PC after the scan finishes.

####

Run DISM (Deployment Image Servicing and Management)

  • In the same Command Prompt window, run: 
    DISM /Online /Cleanup-Image /RestoreHealth
  • Wait for the process to complete (this may take several minutes).
  • Restart your computer.

—

### Method 3: Check and Update Drivers

Outdated or incompatible drivers can cause this error. Update them manually:

####

Update Drivers via Device Manager

  • Press Win + X and select “Device Manager.”
  • Expand categories like “Disk drives,” “Storage controllers,” or “System devices.”
  • Right-click each device, select “Update driver,” then choose “Search automatically for drivers.”
  • Restart your PC after updating.

####

Roll Back Problematic Drivers (if applicable)

  • In Device Manager, right-click the problematic device and select “Properties.”
  • Go to the “Driver” tab and click “Roll Back Driver.”
  • Restart your computer.

—

### Method 4: Run CHKDSK for Disk Errors

If the error is related to disk corruption, run CHKDSK to scan and repair bad sectors:

  • Open Command Prompt as Administrator.
  • Run: 
    chkdsk C: /f /r

    (Replace “C:” with the correct drive letter if needed.)

  • Press Y to confirm, then restart your PC.
  • Note: If CHKDSK is unable to run due to locked files, boot into Safe Mode and try again (see Method 5).

—

### Method 5: Boot into Safe Mode and Perform System Restore

If the error persists, boot into Safe Mode to rule out software conflicts:

  • Restart your PC and hold Shift while clicking “Restart” on the login screen.
  • Select “Troubleshoot” > “Advanced options” > “Startup Settings.”
  • Press F4 or 5 to enable Safe Mode with Networking.
  • Once in Safe Mode, run SFC and DISM again (as described above).
  • Perform a System Restore:
    • Search for “Create a restore point” in the Start menu, then click it.
    • Select “System Restore,” follow prompts to choose a restore point (pick one before the error occurred), and confirm.

—

### Method 6: Check for Windows Updates and Clean Install

Ensure your system is up-to-date and consider a clean install if necessary:

  • Install updates: Go to “Settings” > “Update & Security” > “Windows Update” and install all pending updates.
  • Perform a clean install (last resort):
    • Back up your data, then download the Windows Media Creation Tool from Microsoft’s website.
    • Follow the tool to reinstall Windows while keeping files (if possible).

—

### Method 7: Test for Overheating or Power Issues

Overheating can cause instability. Check your CPU/GPU temperatures using tools like HWMonitor and ensure proper cooling.

—

FAQ About KERNEL STACK INPAGE ERROR (0x00000017)

Q: Will this error damage my hard drive?
A: The error itself doesnt physically harm your drive, but it may indicate a failing component. Run diagnostics to check for bad sectors or hardware failure.

Q: Can I prevent future BSODs after fixing the issue?
A: Yes! Regularly update drivers, scan for malware, and use tools like Windows Memory Diagnostic to monitor hardware health.

Q: Why does this error appear during gaming or heavy workloads?
A: It often happens when your system struggles with high demand (e.g., gaming), signaling overheating, RAM issues, or a failing SSD/HDD.

Q: Is my data safe after a BSOD?
A: Windows usually recovers automatically, but if you experience frequent crashes, back up important files to avoid data loss.

Q: Should I replace my SSD if this error occurs?
A: If diagnostics confirm the drive is failing (e.g., high error rates), replacing it is recommended. Otherwise, check for software-related fixes first.

Final Notes

The KERNEL STACK INPAGE ERROR can be frustrating, but following these steps should resolve it in most cases. Start with hardware checks and work your way through the methods above. If the issue persists, consult a professional technician to diagnose deeper hardware problems. For further assistance, visit Microsofts support page or community forums.

Last Updated: December 13, 2025

Tested on: Windows 10 (22H2) & Windows 11 (23H2)

Leave a Comment