Fixing 0x0000000E NO_USER_MODE_CONTEXT Stop Code on Windows 10 & 11 – Step by Step

by

Short Answer

The 0x0000000E NO_USER_MODE_CONTEXT stop code, also known as a Blue Screen of Death (BSOD), occurs when Windows encounters an error in kernel-mode or user-mode code. This error typically means the system tried to access memory that was not properly allocated or protected, often due to hardware issues, driver conflicts, or corrupted system files. While frustrating, this BSOD is usually fixable with basic troubleshooting steps.

Fix This Error Automatically

Download the recommended repair tool to scan and fix Windows errors.

Download Repair Tool ↓

* Tested & Secure • Windows Compatible

What Is the 0x0000000E NO_USER_MODE_CONTEXT Stop Code?

Common Causes of 0x0000000E

This stop code is usually triggered by one of the following issues:

  • Faulty RAM modules or incorrect memory settings in BIOS/UEFI.
  • Overclocked CPU or other hardware instability.
  • Corrupted system files (e.g., due to a failed update).
  • Outdated, incompatible, or malfunctioning drivers (especially graphics, storage, or network drivers).
  • Antivirus software interfering with memory operations.
  • Malware or system infections causing memory corruption.
  • Hardware conflicts (e.g., a new SSD/HDD not properly recognized).

Step-by-Step Fixes for 0x0000000E

Follow these methods in order to resolve the BSOD. Start with the simplest and move to more advanced steps if needed.

1. Restart Your Computer

The most basic step is to restart your PC. Sometimes, a temporary glitch or memory issue can cause this error, and a simple reboot may clear it without further action. If the BSOD persists after multiple restarts, proceed to the next steps.

2. Check for Hardware Issues

Faulty RAM is one of the leading causes of this stop code. To test your memory:

  • Open Task Manager by pressing Ctrl + Shift + Esc.
  • Go to the Performance tab and click Memory.
  • Look for any errors or warnings in the diagnostics section.

If issues are detected, run a full memory test using Windows Memory Diagnostic:

  • Search for “Windows Memory Diagnostic” in the Start menu and open it.
  • Select Restart now and check for problems (recommended).
  • Wait for the scan to complete. If errors are found, replace or reseat your RAM modules.

    3. Update or Roll Back Drivers

    Outdated or incompatible drivers can trigger this BSOD. Focus on graphics, storage, and network drivers first:

    • Search for “Device Manager” in the Start menu and open it.
    • Expand Display adapters, Storage controllers, and Network adapters.
    • Right-click each device and select Update driver or Uninstall device (if an update is unavailable).
    • Restart your computer after updating to see if the issue resolves.

      4. Run System File Checker (SFC) and DISM

      Corrupted system files can cause memory-related BSODs. Use these built-in tools to repair them:

      • Open Command Prompt as Administrator by searching for “cmd” in the Start menu, right-clicking it, and selecting Run as administrator.
      • Run System File Checker (SFC) with the following command:sfc /scannow

        Wait for the scan to finish. If no issues are found, proceed to DISM.

        • In the same Command Prompt window, run DISM with these commands in sequence:DISM /Online /Cleanup-Image /RestoreHealth 
          DISM /Online /Cleanup-Image /StartComponentCleanup

          Restart your PC after both scans complete.

          5. Disable Antivirus Temporarily

          • Open your antivirus software (e.g., Windows Defender, McAfee, Norton).
          • Disable real-time scanning or set a temporary exclusion for all files.

            • 6. Run Malware Scans

            Malware can corrupt memory and trigger this stop code. Use Windows Defender for a quick scan:

            • Open Windows Security by searching in the Start menu.
            • Go to Virus & threat protection, then click Scan options.
            • Select Full scan and run it immediately.

            If threats are detected, quarantine or remove them. For thorough scanning, consider using a trusted third-party antivirus tool like Malwarebytes or Bitdefender.

            7. Check Disk for Errors

            Corrupted files on your storage drive can also cause this BSOD. Run CHKDSK to scan and repair disk issues:

            • Open Command Prompt as Administrator.
            • Run the following command (replace C with your system drive if needed):chkdsk C: /f /r

              Press Enter, then confirm to schedule the scan on the next restart. Restart your PC and wait for the process to complete.

              8. Test for Overclocking Issues

              • Restart your computer and enter BIOS/UEFI (usually by pressing F2, Del, or Esc during boot).
              • Look for an option like Load Optimized Defaults or Reset to Default.
              • Select it and save changes before exiting. This will revert overclocking settings to stock values.

                9. Perform a Clean Boot

                A clean boot helps identify if third-party software is causing conflicts with your system. To perform one:

                • Search for “msconfig” in the Start menu and open it.
                • Go to the Services tab, check Hide all Microsoft services, then click Disable all.
                • Go to the Startup tab, click Open Task Manager, disable all startup items, then close Task Manager.
                • Click OK, restart your computer, and test for stability. If no BSOD occurs, re-enable one service or startup item at a time to pinpoint the culprit.

                  10. Check Event Viewer for Clues

                  Event Viewer logs system errors that may provide additional details about the cause of this stop code:

                  • Search for “Event Viewer” in the Start menu and open it.
                  • Go to Windows Logs, then System. Look for critical errors around the time the BSOD occurred.

                  11. Reinstall Problematic Drivers or Software

                  If a specific driver (like graphics) or software is causing the issue, reinstalling it may help:

                  • Uninstall the problematic driver via Device Manager.
                  • Install it with clean settings (disable overclocking or other advanced options if applicable).

                    12. Update Windows and BIOS/UEFI

                    Ensure your operating system and firmware are up to date:

                    • Last Updated: December 07, 2025
                      Tested on: Windows 10 (22H2) & Windows 11 (23H2)

Leave a Comment